Best paint for ceilings in Kenya
A flat matt emulsion hides joints and lamp glare. Anti-fungal in kitchens and bathrooms.
What we recommend
Ceilings are the one place where we'd almost always say matt. Light from bulbs and windows hits a ceiling at a low angle, and any sheen picks out every gypsum joint, every roller mark and every patch. Matt hides them.
Vinyl Matt Emulsion is our usual answer. It's water-based and covers about 14 to 15 m² per litre per coat. On big jobs, contractors often use the trade-grade Master Matt Emulsion. In bathrooms and kitchens, where steam rises and mould starts in the corners, use Master Guard for its anti-fungal property.
A few things that make ceilings easier:
- New gypsum board should be sealed before the topcoat, or the joints will show through as dull stripes.
- Water stains from an old roof leak will bleed through emulsion. Fix the leak, let it dry, and seal the stain with an undercoat such as Universal Undercoat before you paint.
- Paint the ceiling before the walls. Drips land on walls you haven't painted yet.
- Thin the first coat slightly with clean water on porous surfaces; the data sheet allows thinning with water depending on the application.
Ceilings take as much paint as a wall of the same area. If you're working out quantities for a whole house, the paint quantity guide helps.
Common questions
What is the best paint for a gypsum ceiling?
A matt emulsion such as Vinyl Matt, after sealing the new board. Matt hides joints and lamp glare.
How do I cover a water stain on the ceiling?
Fix the leak, let it dry, seal the stain with an undercoat, then paint. Emulsion alone lets the stain bleed through.
Not sure what your wall needs?
Send us the job and a photo and we'll recommend products and quantities, or find a stockist near you.



